Re: [sipx-users] Gateway Suggestion for testing
The spreadsheet is slick.
The configs in our wiki pages came out of frustration with the config notes
pages on Patton's web site.
http://sipx-wiki.calivia.com/index.php/HowTo_configure_Patton_SmartNode_SIP_Gateway_with_sipX
Thanks,
Mike
-----Original Message-----
From: Jim Canfield [mailto:jcanfield@xxxxxxxxxx]
Sent: Wednesday, July 01, 2009 10:45 PM
To: Picher, Michael
Cc: Keith Gearty; Tony Graziano; JCasale@xxxxxxxxxxxxxxxxx;
sipx-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [sipx-users] Gateway Suggestion for testing
I just wanted to chime in here:
You guys may find the configuration spreadsheet available from Patton
a huge resource. It's written for the Astra 800, but the same
principals apply.
http://www.patton.com/resources/files/snconfig_aastra800.xls
Also, look at the configuration library on Patton's site
http://www.patton.com/voip/confignotes.asp
Hope this helps,
-Jim
On Tue, Jun 30, 2009 at 4:42 PM, Picher,
Michael<mpicher@xxxxxxxxxxxxxxxx> wrote:
> Sorry if this is a couple days late... we do have some good config
> examples in the Wiki for the Patton that can help tremendously.
>
> Mike
>
> -----Original Message-----
> From: sipx-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:sipx-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Keith
> Gearty
> Sent: Monday, June 29, 2009 10:47 AM
> To: Tony Graziano
> Cc: sipx-users@xxxxxxxxxxxxxxxxxxx; JCasale@xxxxxxxxxxxxxxxxx
> Subject: Re: [sipx-users] Gateway Suggestion for testing
>
> Tony Graziano wrote:
>
>>
>> Patton is good and supported worldwide.
>
> The Patton SmartNodes are very powerful and provide a lot of advanced
> features, but be warned that they have a VERY steep learning curve, and
> can be very daunting for a new user. Basically they are supplied in a
> non-working state, and you have to write a configuration script or
> fiddle with the horribly designed web interface to make them work in the
>
> way you want. They are NOT managed gateways in SipXecs, despite what
> the wiki says. A good place to start with them is the sample config
> script supplied on the wiki.
>
> Note that unless you're in the USA, you'll have to download the
> appropriate tone config from the Patton website, otherwise you'll have
> problems with disconnect tones not working.
>
> I don't know how this compares to other gateways, as I've only ever used
>
> Patton SmartNodes, but I'm sure there must be others that a far simpler
> to use. Probably the most appropriate Patton for you would be the
> Patton SmartNode 4114, which has 4 FXO's and no FXS.
>
> Regards,
> Keith.
> _______________________________________________
> sipx-users mailing list sipx-users@xxxxxxxxxxxxxxxxxxx
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> sipXecs IP PBX -- http://www.sipfoundry.org/
> _______________________________________________
> sipx-users mailing list sipx-users@xxxxxxxxxxxxxxxxxxx
> List Archive: http://list.sipfoundry.org/archive/sipx-users
> Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
> sipXecs IP PBX -- http://www.sipfoundry.org/
>
