| < Previous by Date | Date Index | Next by Date > |
| < Previous in Thread | Thread Index | Next in Thread > |
That’s not how I’d go about it…
I’d setup the Call Manager box as a gateway on the sipX box and then make a dial plan that looks for the extensions on the Call Manager box and routes them out that gateway.
Mike
From: sipx-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:sipx-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Emery ville
Sent: Tuesday, June 30, 2009 9:26 PM
To: sipx-users@xxxxxxxxxxxxxxxxxxx
Subject: [sipx-users] How to integrate SIPX 4.0 with Call manager 5.0
Hello friends,
I am having trouble integrating SIPX 4.0 with Call manager 5.0
I established a sip trunk between both but the sip trunk never is up, I am actually not sure if the sip trunk is up.
I cannot make any calls between the servers.
what I did :
Logged in to Https as superadmin and did the following:
1)
I hit the tab System==>servers==>sipxecs_server==>
and then in the configure options of left side menu
I checked the SIP truinking option.
2)
Devices==> SBC==> created internal sbc.
3)
Then the Devices tab on top
Devices==>Gateways==> right side drop down menu ==>sip trunk==>
configuration : name XXX ip ; address : ip add of call manager, route: sipxbridge-1
ITSP account : ITSP server domain name : 10.x.x.194 (call manager ip address)
username : XXX
password : XXX
4) system==> dialplans==>Dial rule ==>
checked enabled
at the bottom of the page the gateway
restarted all that is required.
I see that the sip is working good when I hit the tab System==>servers==>sipxecs_server==> and services.
Please help me, I thank you in advance.
Thanks,
Emery
Checked by AVG - www.avg.com
Version: 8.5.374 / Virus Database: 270.13.1/2211 - Release Date: 06/30/09 11:37:00