| < Previous by Date | Date Index | Next by Date > |
| < Previous in Thread | Thread Index | Next in Thread > |
|
I am having the same problem some time ago. The difference is I
use another server sipXecs as ITSP. Try to use DNS domain name in the ITSP domain name, and use ip
address or full hostname (with domain) in ITSP server address. I hope that could help From: Emery ville
[mailto:emeryvilleberkley@xxxxxxxxx] Hello friends, I am having trouble integrating SIPX 4.0 with Call manager 5.0 I established a sip trunk
between both but the sip trunk never is up, I am actually not sure if the sip
trunk is up. I cannot make any calls between
the servers. what I did : Logged in to Https as
superadmin and did the following: 1) I hit the tab System==>servers==>sipxecs_server==> and then in the configure
options of left side menu I checked the SIP truinking
option. 2) Devices==> SBC==> created
internal sbc. 3) Then the Devices tab on top Devices==>Gateways==>
right side drop down menu ==>sip trunk==> configuration : name XXX ip ;
address : ip add of call manager, route: sipxbridge-1 ITSP account : ITSP
server domain name : 10.x.x.194 (call manager ip address) username : XXX password : XXX 4) system==>
dialplans==>Dial rule ==> checked enabled at the bottom of the page
the gateway
restarted all that is required. I see that the sip is working
good when I hit the tab System==>servers==>sipxecs_server==> and
services. Please help me, I thank you in
advance. Thanks, Emery DISCLAIMER: Information in this message is confidential and may be legally privileged. It is intended solely for the addressees. Access to this message by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. |