| < Previous by Date | Date Index | Next by Date > |
| < Previous in Thread | Thread Index | Next in Thread > |
|
That’s not how I’d go about it… I’d setup the Call Manager box as a gateway on the sipX box and
then make a dial plan that looks for the extensions on the Call Manager box and
routes them out that gateway. Mike From:
sipx-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:sipx-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Emery ville Hello friends, I am having trouble integrating SIPX 4.0 with Call manager 5.0 I established a sip trunk
between both but the sip trunk never is up, I am actually not sure if the sip
trunk is up. I cannot make any calls between
the servers. what I did : Logged in to Https as
superadmin and did the following: 1) I hit the tab
System==>servers==>sipxecs_server==> and then in the configure
options of left side menu I checked the SIP truinking
option. 2) Devices==> SBC==> created
internal sbc. 3) Then the Devices tab on top Devices==>Gateways==>
right side drop down menu ==>sip trunk==> configuration : name XXX ip ;
address : ip add of call manager, route: sipxbridge-1 ITSP account : ITSP server
domain name : 10.x.x.194 (call manager ip address) username : XXX password : XXX 4) system==>
dialplans==>Dial rule ==> checked enabled at the bottom of the page the
gateway
restarted all that is required. I see that the sip is working
good when I hit the tab System==>servers==>sipxecs_server==> and
services. Please help me, I thank you in
advance. Thanks, Emery Checked by
AVG - www.avg.com |